Netgear ProSafe 802.11g Wireless Firewall with USB Print Server
Page 1 of 2
Price: $276 (MSRP)
Pros: Includes USB print server AND modem backup
Cons: Relatively expensive
Even among the best WLAN routers out there, there are always features missing that would be useful. Perhaps that isn't the case any longer. The new Netgear ProSafe 802.11g Wireless Firewall with USB Print Server (FWG114P), may be the first WLAN router that has essentially every feature one could possibly want or need in a broadband wireless router.
Two things typically missing were support for broadband failover via dial-up modem and/or an internal USB print server. Happily, this $276 unit (it can be had for about $200 online) provides both.
The latter feature has been particularly slow in coming. Routers with parallel print servers are somewhat common, but let's face it--what home, home office, or even small business is still using a parallel printer? (Please, no letters if you are. It's time to upgrade.)
After successfully setting up the printer to use on the FWG114P, I was quite happy to discover that the Epson bi-directional printer status software popped up during print jobs. However, most of the information it's designed to provide -- ink levels, for instance -- was grayed out or otherwise unavailable.
This is an unfortunate and unavoidable side-effect of sharing a bi-directional printer via a network print server, as printer status information is no longer correctly passed back to the device.
In most cases, this will also affect your ability to conduct printer maintenance via the utility software--most tasks will need to be performed via the printer's physical control panel. This is inconvenient to be sure, but the ability to share your printer independent of a PC makes up for the sacrifice.
Sadly, the FWG114P sticks with the archaic 9-pin serial port to accept a modem connection. One could make the argument that this port, too, should have ceded to USB, given the ubiquity of inexpensive USB modems.
However, I'll cut Netgear a bit of slack on this point, since serial modems are still quite common (whereas trying to find a parallel-based printer, especially in the under-$500 SOHO laser and inkjet segment, is often an exercise in futility). Beyond that, the serial port is more likely to be compatible with ISDN hardware as well.
The failover feature will cause the router to initiate a dial-up connection of your choice after a defined period. It worked fine in my test, promptly connecting to my Earthlink account after pulling the plug on the cable modem link. I only wish there was an option to send an immediate alert upon broadband failure.
In addition to providing failover capability, you can also configure the FWG114P/modem combo to provide dial-in access to users, as well as LAN-to-LAN connectivity.
The FWG114P provides a feature few routers have: a handy diagnostics page that lets you view the routing table as well as initiate pings and DNS lookups. Certainly most of this can be done from a PC's command prompt, but doing so from within the router can save some time when trying to isolate connection problems.